Take 10% Off with code SAVE10
Save on Spring Break Shop Now

Powered by HuraTips.Com

How To Replace Lenses on Ray-Ban RB3025 Aviator Sunglasses

December 06, 2018 2 min read

How To Replace Lenses on Ray-Ban RB3025 Aviator Sunglasses

As one of the most recognized sunglasses styles in the world, the Ray-Ban Aviators are the ones who started it all. Whether you have a scratched lens or just want a different color to match your outfit, changing the lenses in your Ray-Ban Rb3025 aviators is super easy!

Typically replacing the lenses usually costs a lot less than replacing the whole pair of sunglasses. Once you’ve purchased replacement lenses for your Ray-Ban sunglasses, you’re just a few simple steps away from having a fully functional pair of sunglasses again.


Ray-Ban lenses vary in sizes so it's important that before you replace the lens that you actually make sure to order the correct size. You will need the following two numbers in order to ensure you are ordering the correct lens.

1. Style #

2. Lens Size

See Diagram below with an example on where to find the style and lens size on your Ray-Ban Aviators. HOW TO ORDER THE RIGHT LENS

How to Easily Remove and Install Replacement Lenses on the Ray-Ban RB3025 Frames

How to replace aviator lenses 

Step 1: Loosen Hinge Screws Using a Phillips specialized eyewear screwdriver, place your Ray-Ban sunglasses on a flat surface. At the top of the temple, you will see a front and back screw (total screws two). Gently loosen the front and back screw just enough so you can pop out the lens.

*Note: Do not remove the screws completely. If you loosen it too much, the frame will come apart. You just want it loose enough that you can actually pop the lens out.

How To Replace Lenses on Ray-Ban RB3025 Aviator Sunglasses 

Step 2. Inserting the New Lens

Once the old lens is removed you can go ahead and place the lens inside the frame (nose side first). Gently place the new lens into the grove, and then push the outer edge and slide the lens into the rest of the grove.

*Note Make sure the lens is flush with the frame to ensure it is secured.

Step 3. Retighten Hinge Screws

After you have determined the lens is flush with the frame you can go ahead and retighten the screws that you loosened in step 1.

*Note: You don’t want to over tighten it so once you start feeling resistance, go ahead and stop.

How To Replace Lenses on Ray-Ban RB3025 Aviator Sunglasses 2 

Step 4. Clean Your LensesAfter successfully replacing your lenses make sure to clean them off with some eyeglasses cleaner spray. Gently rub both sides of the lenses and all part of the frame so your lenses will be crystal clear!

About Ray-Ban Repair:

ShadesDaddy.com is one of the largest internet retailers of Ray-Ban lenses and temples for repair. We order parts directly from Luxottica (the manufacturing company and owner of Ray-Ban,) and pass this service on to the customer.

In order to purchase parts from us, you do not need your sunglasses to be under warranty. However, please note, we are not able to get any Ray-Ban parts that were manufactured during the period that they were manufactured by its past owner, Bausch & Lomb.

All parts are ordered from Ray-Ban and shipped within a 10 day business period from our South Florida office.  

Also in News

Eyeglasses Frames
Eyeglasses Frames

March 15, 2023 2 min read

From the perfect everyday pairs to luxury prescription eyeglasses, the ShadesDaddy collection of eyeglasses frames has everything you need, at a super-low price.
Spring Break Glasses
Spring Break Glasses

March 02, 2023 2 min read

Whether you're looking to party or lookin for a new adventure, check out our selection Spring Break glasses that are perfect for whatever you're up to.
Valentine's Day Gifts
Valentine's Day Gifts

February 02, 2023 2 min read

Get her the Valentine's Day gift she really wants - a pair of stunning frames at a great price! Grab trending pairs, classic and more!